Kozo Paper Tower Swag Pendant-Fast Shipping

Description

Effortless Illumination, Timeless Charm

Rice Paper Series — Lightness & Harmony

Watch: Installation Video →

Plug-in swag — install in any room, no electrician needed

• 450 cm (177″) matte black cord — enough to route from any wall outlet to wherever you want the pendant to hang.
• 2 wall hooks included — mount one near the outlet to route the cord along the wall or ceiling, the other above the pendant drop point.
• Inline push-button on/off switch — no wall switch needed.
• Fully portable and repositionable — unplug and rehang anywhere.

Hand-bonded mulberry paper — minor glue traces are normal

Each shade is individually hand-crafted. Minor glue traces along the edge are a natural result of the hand-bonding process and are not quality defects.

Features

Stacked Kozo Tower

Mulberry paper shade in the same stacked lantern form — warm, sourceless glow.

450 cm Cord + 2 Hooks

Extra-long black cord routes to any outlet. Two wall hooks for clean cord management.

Dual E26/E27

Two bulb sockets — even, warm ambient light through the full shade height.

How to Hang — 3 Steps1

Mount the wall hooks

Fix Hook A near the outlet, Hook B at the desired point above where the pendant should hang. Both hooks are included.

2

Route the cord

Run the 450 cm black cord from the plug along the wall or ceiling via Hook A, then over to Hook B. The cord drapes in a clean diagonal or arc.

3

Drop the pendant & plug in

Adjust the drop length at Hook B so the pendant sits at your preferred height, then plug in to the nearest outlet. Done.

SizeTap to enlargeSingle size∅ 18.5″ × H 32.2″Dia 47 cm × H 82 cm
2 × E26/E27 sockets
450 cm (177.2″) matte black cord
Inline push-button on/off switch
2 × wall hooks included
Bulb & Light Source

2 × E26 (US/CA) or E27 (EU/AU) — bulbs not included

Two warm-white LEDs at 2700–3000 K are recommended — the warm tone passes through the mulberry paper as a soft, sourceless glow. Use matching bulbs of the same wattage and colour temperature in both sockets. Two 6–8W warm LEDs (12–16W combined) provide comfortable ambient lighting for a dining table or living area up to 20 m².

Guide to E26 and E27 bulb selection →

Same Series

Kozo Paper Series — browse all rice paper fixtures →

Floor lamps, globe pendants, table lamps and more in the same hand-crafted Kozo paper tradition.

Specifications

DownloadsSpec Sheet Installation Guide
Frequently Asked QuestionsHow much wall space does the cord take up?

The 450 cm (177 inches) cord is long enough to route from a floor outlet, up the wall, across the ceiling to above the hanging point — comfortably covering rooms of 3–4 m width. The cord runs along the wall and ceiling in a clean diagonal or arc, clipped via the two included hooks. The matte black cord and hooks are designed to read as a considered design element rather than a compromise — particularly against white or light-toned walls and ceilings.

What surfaces can I mount the wall hooks on?

The included hooks can be mounted on drywall, plaster, timber, brick, and concrete surfaces with appropriate fixings. On drywall, a drywall anchor is recommended for Hook B (the load-bearing hook above the pendant). Hook A (near the outlet, lighter load) can often use a simple screw. Confirm wall type and load rating with the hook hardware before installation if you are unsure.

Can I use this as a hardwired pendant instead of plug-in?

No — this version is designed for plug-in use only. If you need the same Kozo Paper Tower shade as a hardwired ceiling pendant, please see our hardwired version of this pendant in the same series. The two products share the same shade and dimensions but have different wiring systems.

Is this lamp certified for North America and Europe?

Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.